|E-513/523/533Remote Control Training Collar User’s Manual
Thank you for choosing our product!
Please read this manual carefully before using the product.
Please do read the Cautions, for fear that unwanted results arise from improper operation.
The product can control one, two or three receiver at the same time.
A Preparation before using:
1. Make sure that batteries are installed in the remote controller. Press the “ON/OFF” button for about two seconds, the three LED lights will light. Press the button again can turn off the power.
2 The remote controller has an power-saving feature, when you don’t operate it in a long time, the power will be turned off automatically. You should turn on the power to be re-used.
3 When the remote controller is in a standby state, press the button shortly can choose the LED light. The 1,2,3 LED light stands for three different receivers.( when the remote controller just control one receiver, you don’t need to choose it.)
4 The rotating button of the remote controller is used to adjust the intensity of and .
5 Checking the remote controller: Press the buttons on the remote controller one by one and the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.
6 The receiver has an power-saving feature, the power will be turned off automatically without receiving orders in a long time or in a long rest . When the receiver vibrates , the power indicator light installed in the receiver will light . If it doesn’t light or goes dim, it means that the electricity of the battery is not enough , then you should use the appropriative charger to charge it.
7 Checking the receiver: Respectively press the and buttons on the remote controller and the receiver will release corresponding vibration or shock.
8 When testing the shock function of the receiver, you will hear a “pa-pa” sound from the receiver. When the testing bulb is connected with the poles, it will light. The stronger of the shock, the faster of the flashing.
9 The or of the collar is to curb the improper deeds of the pet. After each successful check, you should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like.
10 Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.
11 Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training
B Operational instructions:
1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert a finger in between.
2 Most pets feel uncomfortable at first wearing the collar. Don’t use the function at that time until you are sure that the pet has gotten used to the collar. The is used to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.
3 You can call your dog soundlessly by in a long distance. You can also use the to convey your orders.
4 If you don’t use this product, take the collar and receiver off the pet and turn off the power, so as to prolong the lifetime of the batteries.
5 There is a vibration sensor switch in the receiver , you just need to put it alone, then the power of it will be turned off automatically.
C How to change or charge the batteries:
1 The lithium battery installed in the receiver can be recharged. Please use the charger the product offers to charge it .
2 Remote controller: The battery cell cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (Model 6LR61, 9V) and put a new one back and then close the cover.
3 The lifetime of the batteries vary according as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send signals, its batteries’ lifetime is usually more than one year.
4 After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. A frequent use of it will consume electricity quickly. Therefore you should often check the batteries by watching the indicator light. When the electricity of the batteries is not enough , please use the appropriative charger to charge the batteries..
1. At first wearing this collar, some pets will feel uneasy. Give the pet some time to get used to it. Don’t use the function of this product until you are sure that the pet has gotten used to it.
2. Digital audio transmitting technology is applied in the remote controller. Remote control signals can penetrate obstacles. It is unnecessary for the remote controller to point directly at the receiver. However, obstacles will affect the valid distance of remote controlling.
3. The valid distance of remote controlling means the straight-line distance between the remote controller and the receiver without obstacles in between. If there are interference signals or signal screening around, the actual remote control distance may be shorten.
4 The product is used for training the pets. You should be patient when training the pets. Good effect can only be achieved by lasting use of it.
5 The and of the receiver is used to curb the improper deeds of the pets. Please be advised that don’t use the high frequency vibration to make fun of the pet.
6 Presently, this product is the most humane tool for pet training. Following the correct operational instructions, you can effectively train the pet and bring it no harm.
7 Though the receiver is waterproof, you cannot immerse it into the water for a long time.